Commercial Electric CER5741AWH30 Manuel d'instructions télécharger pdf

WARNING - RISK OF ELECTRIC SHOCK. DISCONNECT

MAIN POWER AT FUSE OR CIRCUIT BREAKER

BEFORE INSTALLING OR SERVICING THE FIXTURE.

LED 5” RETROFIT TRIM INSTALLATION

INSTRUCTIONS - MODEL CER5741A

QUESTIONS? CALL TOLL

FREE 1-800-345-0542

Please read carefully and save these instructions, as

you may need them at a later date.

GENERAL: All electrical connections must be in accordance with

local and National Electrical Code (N.E.C.) standards. If you are

unfamiliar with proper electrical wiring connections obtain the services

of a qualified electrician.

Remove the trim from the box and make sure that no parts are

missing by referencing the PARTS illustrations.

THIS RETROFIT ASSEMBLY IS ACCEPTED AS A COMPONENT

OF A LED LUMINAIRE WHERE THE SUITABILITY OF THE

COMBINATION SHALL BE DETERMINED BY CSA OR CANADIAN

AUTHORITIES HAVING JURISDICTION.

__________________________________________

WARNING- RISK OF FIRE OR ELECTRIC SHOCK

FOR USE WITH HOUSING MODELS: INCANDESCENT

HOUSINGS – COMMERCIAL ELECTRIC HBR5ICAT, HBR5ICRAT,

HBR5, HBR5R; HALO H5T, H5RT, H5ICT, H5RICAT, H5RICAT;

CORDELIA X5LICAT, X5LICRAT; ELCO EL5ICA, EL5RICA;

LITHONIA L5, L5R; ELITE B5, B5R, B5IC, B5RIC. HALO LED

HOUSINGS – H550ICAT, H550RICAT.

• Do not alter, relocate, or remove wiring, lampholders, power supply,

or any other electrical component. Installation of the retrofit

assembly requires a person familiar with the construction and

operation of the luminaire’s electrical system and the hazard

involved. IF NOT QUALIFIED, DO NOT ATTEMPT

INSTALLATION. CONTACT A QUALIFIED ELECTRICIAN.

• Do not make or alter any open holes in an enclosure of wiring or

electrical components during kit installation.

• To prevent wiring damage or abrasion, do not expose wiring to

edges of sheet metal or other sharp objects.

____________________________

ASSEMBLY AND INSTALLATION

1. If the installed housing does not have TORSION SPRING SLOTS

or C-CLIPS (FIG. 5), then remove the SCREWS securing the

TORSION SPRINGS to the HEATSINK. Attach the FRICTION

BLADES (included) to the same location using the SCREWS that

were previously removed. (FIG. 7)

INCANDESCENT HOUSINGS

1. Unscrew the WING NUT inside the CAN to detach the SOCKET

BRACKET from the CAN. Disengage the SOCKET from the

SOCKET BRACKET. (FIG. 2)

2. Thread the SOCKET ADAPTER into the SOCKET. (FIG. 3)

3. Plug the FEMALE CONNECTOR of the RETROFIT TRIM onto the

MALE CONNECTOR of the SOCKET ADAPTER ASSEMBLY.

(FIG. 4)

4. If using TORSION SPRINGS, squeeze both TORSION SPRING

arms together and insert into the TORSION SPRING SLOTS (or

RECEIVER BRACKETS) of the CAN. (FIG. 5)

5. Tuck all wires into the CAN and carefully push the RETROFIT

TRIM into CAN. (NOTE: To provide enough room in shallow cans,

carefully position SOCKET ADAPTER and SOCKET adjacent to

the long side of the LED DRIVER prior to inserting the RETROFIT

TRIM into the CAN.) (FIG. 5)

LED HOUSINGS

1. Plug the FEMALE CONNECTOR of the RETROFIT TRIM onto the

MALE CONNECTOR of the HALO HOUSING. (FIG. 4)

2. If using TORSION SPRINGS, squeeze both TORSION SPRING

arms together and insert into the TORSION SPRING SLOTS (or

RECEIVER BRACKETS) of the CAN.

3. Tuck all wires into the CAN and carefully push the RETROFIT

TRIM into CAN. (FIG. 5)

FACEPLATE REPLACEMENT (OPTIONAL)

This product is designed to allow the user to easily replace the

magnetically attached DECORATIVE FACEPLATE of the RETROFIT

TRIM.

1. Pull off the FACEPLATE from the RETROFIT TRIM. (FIG. 6)

2. Attach the replacement FACEPLATE onto the RETROFIT TRIM.

(FIG. 6)

5 in. – 7 in.

FIG. 2

FIG. 3

PARTS

SOCKET ADAPTER

ASSEMBLY

RETROFIT TRIM

COMPATIBLE HOUSING

DIMENSIONS

FIG. 4

FIG. 5

5 in.

FIG. 6

REV 04-AUG-14

FIG. 7

1 2 3 4 5 6

Résumé du contenu

Page 1 - 1-800-345-0542

WARNING - RISK OF ELECTRIC SHOCK. DISCONNECT MAIN POWER AT FUSE OR CIRCUIT BREAKER BEFORE INSTALLING OR SERVICING THE FIXTURE.LED 5” RETROFIT TRIM IN

Page 2 - 120V 60Hz

_______________________________FIVE-YEAR LIMITED WARRANTYCommercial Electricwarrants this product to be free fromdefects in material and workmanship

Page 3 - CER5741A

ADVERTENCIA: RIESGO DE DESCARGA ELÉCTRICA. DESCONECTE EL SUMINISTRO ELÉCTRICO DE LA CAJA DE FUSIBLES O LOS INTERRUPTORES DE CIRCUITO ANTES DE INSTALAR

Page 4

Page 5 - 12,7 – 17,78 cm

AVERTISSEMENT – RISQUE DE DÉCHARGE ÉLECTRIQUE. COUPEZ LE COURANT AU NIVEAU DU DISJONCTEUR OU DE LA BOÎTE DE FUSIBLES AVANT D’INSTALLER OU D’EFFECTUE

Page 6

_____________________________GARANTIE LIMITÉE DE CINQ ANSCommercial Electricgarantit ce produit contre tout défaut dematériaux ou de fabrication pour